|
|
CLEAR PAINT PROTECTION How to care for your genuine Toughfilm Paint Protection Film. Congratulations on your purchase of the Genuine Toughfilm Paint Protection film .
This film is made up of a polyurethane material topped with a clear-coat layer to exhibit a paint like gloss. It requires
special care and maintenance in order to maintain its glossy finish , overall look and performance. The following must be
considered when cleaning and maintaining the film. CARE
AND MAINTENANCE 1 You will see a few bubbles under the
film . This is normal and it will go away once the film has cured ( up to 45 days). 2 Dust and wash the film regularly to prevent dirt build up around the edges and to maintain its glossy
finish . 3 Use a liquid based car wash soap, extra soft wash mitt
and water to wash your film. 4 When using a high pressure water
hose to wash , keep it at least 36" away from the film edges and surface. 5 Wipe down with a clean and dust free chamois and finish off with a microfiber drying towel. 6 Use a small toothpick or detailing cloth to softly remove any wax build up around the edges. 7 Bird droppings and bug splats, when left on with out washing, may leave stains that normally bleach out
in the sun after a few weeks. 8. Meguires #9 polisher
is recommended to buff out scratches on the film . DO
NOT DO THE FOLLOWING: Do not use any abrasive scrubbers,
sponges or paper towels Do not use a powder based detergent or degreaser
to clean your film. Do not use any clay based products /hard compound
waxes or polishes to clean the film surface. ONLY DYE FREE WAX PLEASE!!!(eg MEGUIERS NXT 2.0 WAX OR ZYMOL CLEANER
WAX) OR TRY THE NEW XPEL SURFACE PROTECTANT/SEALANT AND BYPASS WAXING!!!!! Do not use excessive force when cleaning or drying Do not
use a high speed buffer or polishing equipment Do not Pick the paint
protection film edges. Once the material is lifted it will not lay back down properly without damage.
TOUGHFILM INC PAINT PROTECTION FILM TINTED HEADLIGHTS PAINTED WRAPS |
|